Tongue & Groove Wall Panels

Choosing Size

Portrait (tall)
Use portrait when the panel needs to be taller than wide – e.g. floor-to-ceiling.

Landscape (wide)
Use landscape when the panel needs to be wider than tall – e.g. half-height walls, media walls, shelving.

Dimensions
All measurements are shown in millimetres (mm).
For half-height walls, we usually recommend around 1200mm high.
For exact finished sizes, choose Cut To Size so we cut to your exact mm.

Design direction
The panel pattern always runs vertically in both portrait and landscape.
To achieve horizontal lines, order portrait and install on its side.

Measuring Tips

• Walls are rarely perfectly straight - allow a few extra mm if needed
• Measure from the top of the skirting (not the floor)
• If there is coving, measure from the bottom of the coving
• Panels join seamlessly in almost all cases
• If joining two full-size sheets (2440×1220mm or 3050×1220mm) these may need a light trim for a perfect seamless join

This tongue and groove panelling works beautifully across a variety of interior styles:

• Farmhouse: Achieve a cozy, rustic charm with the natural, clean lines of this wood panelling, making it perfect for kitchens, living rooms, and dining areas.
• Coastal & Cottage: When painted in soft whites or pastels, this wall panelling creates a breezy, relaxed atmosphere, ideal for bathrooms or beachside homes.
• Modern Traditional: Add a timeless touch to entryways and hallways, blending tradition and sophistication with this stylish wall panel design.
• Scandinavian Minimalist: The vertical grooves of this wood panelling provide sleek texture, perfect for minimalist bedrooms or contemporary living areas.

With its easy installation and custom sizing options, this wall panelling adds depth and character to any space.

Our Cut-to-Size Service ensures a perfect, custom fit for your project. Each panel is precisely cut, saving you time, effort, and the expense of hiring a professional.

Get your bespoke panels here: Cut-to-Size Wall Panels

Measure Your Wall Panel Area
Start by measuring the area where the wall panels will be installed to ensure accurate dimensions. If needed, cut down the panels or take advantage of our cut-to-size service for a precise fit.

Prepare the Panels
Apply a primer to create a smooth, even surface, improving paint adhesion for a flawless finish.

Paint Your Panels
Choose your desired paint color and apply it to the panels. Let the panels dry completely before moving on to the installation process.

Apply Adhesive and Position the Panels
Spread a suitable adhesive on the back of each panel. Carefully position the panel on the prepared surface, pressing firmly. Use tape or temporary supports to keep the panel in place while the adhesive sets.

Check out our full step-by-step installation guide here.