Slat Wall Panels
Slat Wall Panels
Ends: Loading...
10% Off £100+ code: FLASH10
25% Off £300+ code: FLASH25
30% Off £600+ code: FLASH30
Couldn't load pickup availability
Key Panel Features:
- Made-to-order in the UK 🇬🇧
- Paintable & Moisture-Resistant
- Sustainable
- Cut to Size Available
- Easy Installation
Transform your home or commercial space with our moisture-resistant MDF Slatwall Panels – perfect for bathrooms, kitchens, hallways, and feature walls.
Choose from 9mm or 12mm thick panels, in portrait or landscape orientation, the slats run vertically for both.
Need custom sizing? Use our cut-to-size service to save time, reduce waste, and ensure a perfect fit. Offcuts included.
Easy to install: cut to size (if needed), prime, paint, and mount with grab adhesive.
Not ready to commit yet? Order a Slat Wall Panel Sample.
Panelling a commercial space or near a heat source? Check out our Fire Rated Wall Panels for enhanced safety.
What Size Should I Order?
What Size Should I Order?
Choosing Size
Portrait (tall)
Use portrait when the panel needs to be taller than wide – e.g. floor-to-ceiling.
Landscape (wide)
Use landscape when the panel needs to be wider than tall – e.g. half-height walls, media walls, shelving.
Dimensions
All measurements are shown in millimetres (mm).
For half-height walls, we usually recommend around 1200mm high.
For exact finished sizes, choose Cut To Size so we cut to your exact mm.
Design direction
The panel pattern always runs vertically in both portrait and landscape.
To achieve horizontal lines, order portrait and install on its side.
Measuring Tips
- Walls are rarely perfectly straight - allow a few extra mm if needed
- Measure from the top of the skirting (not the floor)
- If there is coving, measure from the bottom of the coving
- Panels join seamlessly in almost all cases
- If joining two full-size sheets (2440×1220mm or 3050×1220mm) these may need a light trim for a perfect seamless join
The Design
The Design
Bring style, texture, and warmth to your interiors with our beautifully crafted Slat Wall Panels, designed to suit a wide range of modern and organic interior styles. These wall panels are not only stylish but also practical - making them suitable for every room in the house, including bathrooms, kitchens, bedrooms, and living rooms.
Available in 9mm or 12mm thickness, our slat panels are designed with 29mm-wide slats and 10mm spacing for a balanced, sleek look. Whether you're aiming for a subtle architectural detail or a bold feature wall, our sleek, uniform groove design brings elegance and character to any space.
Our slat wall panels are paintable, allowing you to customise them in any shade to match your interior palette. Keep it soft with muted beiges, plaster pinks, or warm taupes for a calm, modern vibe, or go bold with deep greens, navy blues, or charcoal for a dramatic, high-contrast statement.
Our Cut To Size Service
Our Cut To Size Service
Our Cut-to-Size Service ensures a perfect, custom fit for your project. Each panel is precisely cut, saving you time, effort, and the expense of hiring a professional.
Get your bespoke panels here: Cut-to-Size Wall Panels
How To Install
How To Install
Measure the Area:
Start by measuring the space where your wall panels will go to ensure accurate dimensions. You can cut the panels yourself or take advantage of our cut-to-size service for a hassle-free, custom fit.
Prepare the Panels:
Lightly sand (if needed) then apply a primer to create an even base - this helps the paint adhere better and ensures a clean, professional finish.
Paint the Wall Panels:
Paint the panels in your chosen colour, and allow them to dry completely before installing.
Apply Adhesive and Position Panels:
Apply a suitable adhesive on the back of each panel, then press it firmly onto the prepared surface. Use masking tape or temporary supports to keep it in place while the adhesive cures.
Secure and Complete:
After the adhesive has fully set, remove any supports and double-check that all panels are securely attached.
Check out our full step-by-step installation guide here.
Loved by Interior Experts 🤍
Featured In
Frequently Asked Questions
Can slat wall panels be used in a bathroom or kitchen?
Yes, our slat wall panels are moisture-resistant so can be used in any room, including your bathroom or kitchen. If your panels are likely to be in direct contact with water, we recommend using waterproof wall panels.
Can slat wall panels be fitted next to a heat source?
If your panels are going to be in direct contact with a heat source such as a hob or electric fire, we recommend opting for our fire rated slat panels.
Do you offer slat wall panel samples?
Of course! We offer samples for all our wall panel designs and they are delivered for free within two working days. They're a perfect way to envision how our panelling will complement your space. View our ribbed sample here.
Do slat wall panels need painting?
Yes. They come unfinished, so need priming and painting to achieve your desired finished look. Check out our guide on how to paint wall panels here.
How do I fit slat panels?
Secure each panel to the wall using grab adhesive (and nails if needed), sanding lightly if necessary and sealing any gaps. Then, apply a coat of prime, followed by your chosen paint in thin, even layers, allowing each coat to dry fully before the next. See our full step by step installation guide here.
How do I miter slat wall panels?
To miter our slat MDF wall panels, you’ll need to cut the edges at a 45° angle, so they fit neatly together. The best tool for the job is a mitre saw, as it gives you clean, accurate cuts. You can also use a table saw with an adjustable blade angle, or a track saw if you're working with longer panels. Once cut, use clamps and wood glue to secure the joints, and lightly sand the edges for a smooth, professional look.