Mini Fluted Wall Panels

Choosing Size

Portrait (tall)
Use portrait when the panel needs to be taller than wide – e.g. floor-to-ceiling.

Landscape (wide)
Use landscape when the panel needs to be wider than tall – e.g. half-height walls, media walls, shelving.

Dimensions
All measurements are shown in millimetres (mm).
For half-height walls, we usually recommend around 1200mm high.
For exact finished sizes, choose Cut To Size so we cut to your exact mm.

Design direction
The panel pattern always runs vertically in both portrait and landscape.
To achieve horizontal lines, order portrait and install on its side.

Measuring Tips

• Walls are rarely perfectly straight - allow a few extra mm if needed
• Measure from the top of the skirting (not the floor)
• If there is coving, measure from the bottom of the coving
• Panels join seamlessly in almost all cases
• If joining two full-size sheets (2440×1220mm or 3050×1220mm) these may need a light trim for a perfect seamless join

Our mini fluted wall panels feature 3mm deep flutes, 20mm wide, with 5mm spacing for a refined, textured look. Their subtle detailing adds depth and sophistication, perfect for contemporary, Scandinavian, or mid-century interiors.

Ideal for living rooms, bedrooms, hallways, dining areas, and smaller spaces like home offices or dressing rooms. They enhance walls, cabinetry, or feature areas without overwhelming the room.

For a timeless look, paint in soft neutrals. For drama, choose deep greens, navy, or charcoal to make the fluting stand out.

Please note: The profile shown reflects a new cutter. Over time, sharpening may slightly soften the shape, and machining may cause minor bowing.

Our Cut-to-Size Service ensures a perfect, custom fit for your project. Each panel is precisely cut, saving you time, effort, and the expense of hiring a professional.

Get your bespoke panels here: Cut-to-Size Wall Panels

This wall panel is made from Finsa Hidrofugo MDF, which has a green core and is a high-performance, moisture-resistant MDF designed for exceptional durability. Treated to withstand humidity and moisture, this MDF is perfect for use in areas such as kitchens, bathrooms, and other high-moisture environments.

Benefits of Finsa Hidrofugo MDF:

• Moisture-Resistant: Designed to resist warping and swelling, even in humid conditions.
• Durability: Provides a strong, long-lasting base for your wall panels.
• Smooth Finish: Delivers a flawless surface for painting or laminating, enhancing visual appeal.
• Sustainable: Produced using eco-friendly materials, promoting sustainable building practices.

1. Measure Your Wall Panel Area
Begin by measuring the area where you plan to install the wall panels to ensure accurate dimensions. Cut the panels as needed to fit your space, or use our cut-to-size service for a precise fit.

Prepare the Panels
Lightly sand (if needed) then apply a primer to create a consistent base, which will improve paint adhesion and help achieve a flawless finish.

Paint Your Panels
Apply your chosen paint colour to the wall panels, ensuring they are fully dry before installation.

Apply Adhesive and Position the Panels
Apply a grab adhesive to the back of each panel. Carefully position the panels on your prepared surface, pressing firmly into place. Use tape or temporary supports to hold them until the adhesive sets.

Check out our full step-by-step installation guide here.