How To Prep & Fit Your Wall Panels

Installing your wall panels is super straight-forward. However, to ensure you achieve a professional, flawless finish, we’ve put together a comprehensive step-by-step to help you along the way.

Before you get started, make sure you have your supplies:

If you're working on a transformation project, don't forget to take a before photo!

 

Step 1. Secure To Your Surface - if you’re mounting your panels to a tricky to reach area, follow steps 2 - 4 first

  • Apply grab adhesive evenly to the back of each panel.
  • Position the panel on the wall or surface and press firmly.
  • Seal any gaps between panels with additional adhesive for a seamless finish. Wipe away any excess adhesive with a damp cloth.
  • Follow the adhesive's drying time instructions—typically, at least 24 hours. For added stability (especially in high-traffic areas or with thicker panels) you can secure the corners with nails.

Step 2. Apply Primer 

Priming creates a uniform base and improves paint adhesion. Apply a thin, even coat of primer to each panel using smooth strokes to avoid drips and streaks. Allow it to dry for a few hours.

Step 3. Paint The Panels

It's time to add colour!

  • Choose a high-quality paint in your desired colour and finish (matte, satin, gloss, etc.).
  • Using a clean brush to apply the paint in thin, even coats. Multiple thin coats are better than one thick coat to avoid drips and ensure a smooth finish. Allow each coat to dry before applying the next.
  • After achieving your desired coverage, inspect the panels for any missed spots or imperfections and touch them up as needed.

Congrats - You Did It!

Sit back, have a cuppa and admire your handy work. Don't forget to take a photo of your finished result and tag @panelsbysofia to be featured on our grid.

Back to blog